You need to be trained before using our printers.
Only current, authorized trainers can deliver printer training.
You can check which printers you're signed off to use via Training Tracker
Our resin printers are primarily sliced using Chitubox
| Printer | Status | Build volume | Layer height |
|---|---|---|---|
| Anycubic Mono X | ✔️ Operational | 192x120x245 | 10 ~ 150um |
| Phrozen Sonic Mega 8K | ✔️ Operational | 330x185x400 | 10 ~ 300um |
Our FDM slicers are primarily sliced using PrusaSlicer or Bambu Studio
| Printer | Status | Build volume | Training Category |
|---|---|---|---|
| Bambu Labs P1S (2x AMS) | ✔️ Operational | 256x256x256 | FDM/Bambu-Enclosed |
| Bambu Labs X1 (1x AMS) | ✔️ Operational | 256x256x256 | FDM/Bambu-Enclosed |
| Bambu Labs A1 (1x AMS) | ✔️ Operational | 256x256x256 | FDM/Bambu-Open |
| Bambu Labs A1 Mini #1 | ✔️ Operational | 180x180x180 | FDM/Bambu-Open |
| Bambu Labs A1 Mini #2 | ✔️ Operational | 180x180x180 | FDM/Bambu-Open |
| Bambu Labs A1 Mini #3 | ✔️ Operational | 180x180x180 | FDM/Bambu-Open |
| Ender 3 V2 Neo #1 | ❌ Removed from service | 220x220x250 | FDM/Ender |
| Ender 3 V2 Neo #2 | ❌ Removed from service | 220x220x250 | FDM/Ender |
| Prusa Mk4 | ✔️ Operational | 250x210x220 | FDM/Prusa Mk4 |
| Prusa XL-5T | ✔️ Operational | 360x360x360 | FDM/Prusa XL |
| Voron Trident | ❌ AF prints only | 350x340x250 | FDM/Trident |
This section is still a work in progress!
| X1/P1S | Ender 3 | Mk4 | XL-5T | |
|---|---|---|---|---|
| ABS | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| ABS (CF) | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| ABS (GF) | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| ABS Pro (Sparkle) | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| ASA | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| ASA (CF) | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| ASA (Sparkle) | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| HTPLA | ✅ | ❌ | ✅❌💨 | ✅❌💨 |
| HTPLA (CF) | ✅ | ❌ | ✅❌💨 | ✅❌💨 |
| HTPLA (Metal Composite) | ✅ | ❌ | ✅❌💨 | ✅❌💨 |
| Nylon | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| Nylon (CF) | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| PC-ABS (Sparkle) | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| PC (CF) | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| PETG | ✅ | ✅ | ✅❌💨 | ✅❌💨 |
| PETG (CF) | ✅ | ❌ | ✅❌💨 | ✅❌💨 |
| PETG (Matte) | ✅ | ✅ | ✅❌💨 | ✅❌💨 |
| PETG (Protopasta) | ✅ | ✅ | ✅❌💨 | ✅❌💨 |
| PLA | ✅ | ✅ | ✅❌💨 | ✅❌💨 |
| PLA (CF) | 💨 | ❌ | ✅❌💨 | ✅❌💨 |
| PLA (Conductive) | ✅ | ❌ | ✅❌💨 | ✅❌💨 |
| PLA (Dual-colour) | ✅ | ✅ | ✅❌💨 | ✅❌💨 |
| PLA (Matte) | ✅ | ✅ | ✅❌💨 | ✅❌💨 |
| PLA (Metal Composite) | ✅ | ❌ | ✅❌💨 | ✅❌💨 |
| PLA (Silk) | ✅ | ✅ | ✅❌💨 | ✅❌💨 |
| PLA (Tri-colour) | ✅ | ✅ | ✅❌💨 | ✅❌💨 |
| PLA Pro (Sparkle) | ✅ | ❌ | ✅❌💨 | ✅❌💨 |
| PLA+ | ✅ | ✅ | ✅❌💨 | ✅❌💨 |
| PLA-Support | ✅ | ❌ | ✅❌💨 | ✅❌💨 |
| TPU | ❌ | ❌ | ✅❌💨 | ✅❌💨 |
| TRIBO i150 | ✅ | ❌ | ✅❌💨 | ✅❌💨 |