Laser Subcommittee Meeting 2020-02-15
Attendees: BlakeS, NickB, FletcherB, Beau
BlakeS: Trialing Saturday mornings
Possible rearrangement of machines for combined ducting and chiller stacking
We'd still like
red dot beam combiners
, which would render getting a tube that has a built in aiming beam moot
Would we like one?
Nick, Blake: yes; Fletcher: no
Fletcher: Recommends crowdfunding it at
Fixed: Beau reported: Z pulley grub screw? was loose, came off, bed was not moving vertically
LG500 Little Red (out-of-order)
Replacement tube: arrived, test fired: success
Requires air extraction
LC1290 Big Red
Level bed (was out by 5mm, now within 1mm)
Test fire setting was "stuck on"
when triggered from button panel and from PC/LaserCut v5.3
Set to ~99980ms
Reset to 300ms MENU -> LASER SET -> LASER TIME
Panel setting not saved/restored by PC "download configuration"?
Empty compressor tanks (little content: recently done), water trap
The hour meter started from 1.6 hours, at 20171210 , 512 beam-active cutting hours per annum
488.9 100W installed 20181222