- Attendees: BlakeS, Fletcher, NickB, JM, Kym, Justin Richards
<!-- -->
- LC1290 Big Red
- Speed test cut - cutting fine at 55mm/s on 3mm MDF
- Tried Fletcher's new focus test piece - cut on swarfomat
- LG500 Little Red
- Speed test cut - less than 10mm/s, focus looks out
- Replace o ring
- Clean lens
- Z probe failed
- Took Kellogg's z probe and installed in little red
- changed the 5V wire to 24V for the z probe power - no laser pointer possible now
- Changed offset to 15.5 mm - best of stepped focus piece
- Kellogg
- Lens
- New lens and o rings arrived. Stored in laser supplies.