Attendees: Nick, Blake
Issues:
- Big red x axis belt had broken (as reported on mailing list)
- Used spare belt to replace machine
- Updated spares list on wiki
- Hour meter on big red at 149hours
- Cleaned big red tracks
- Cleaned big red lens and reattached head
- Test cuts getting 55 to 60mm/s on 3mm MDF
- z-probe in centre and cuts in corners gave variable cut speeds. z-probing each corner worked well though. heights using acrylic ruler thing were within 1mm so not totally sure what the issue is. had previously checked beam alignment and was ok.