Trace: • millmini
Tools:millmini
Table of Contents
Carbatec Mini Mill
Approved Users
Trainers
Users
Instructions for Use
Before turning the mill on, ensure that both the main power switch and speed control knob are in the 'off' position.
Use climb cutting for steel. Conventional or climb can be used for softer materials :
http://en.wikipedia.org/wiki/Milling_cutter#Conventional_milling_versus_climb_milling
2 fluted milling bits are suitable for aluminium, use 4 fluted one for steel
Specifications
End-mill Capacity | 10mm |
---|---|
Face-mill Capacity | 20mm |
Spindle Stroke | 30mm |
Throat | 140mm |
Maximum Distance Spindle to Table | 220mm |
Spindle Taper | MT2 |
Spindle Speeds (High Range) | 100 - 2000rpm |
Spindle Speeds (Low Range) | 100 - 1000rpm |
Forward/Reverse | Yes |
Column Tilt | ±45° |
Table Size | 240 x 145mm |
Table Cross Travel | 180mm |
Longitudinal Travel | 180mm |
Motor | 1/5hp |
Notes