tools:milling_machine

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tools:milling_machine [2022/08/03 13:19]
ben [Accessories]
tools:milling_machine [2022/08/03 13:19] (current)
ben [Current status of the machine and notes on use]
Line 97: Line 97:
 At present the machine is operational but two of machine functions are limited pending repair or replacement of parts:\\ At present the machine is operational but two of machine functions are limited pending repair or replacement of parts:\\
 • The y-axis power feed is disabled as the motor has an earth fault and requires replacement. The x-axis feed works as normal.\\ • The y-axis power feed is disabled as the motor has an earth fault and requires replacement. The x-axis feed works as normal.\\
-• The mill does not currently have an oiler installed. An oiler has been ordered and should be installed by end-May 2021.\\ 
  
 ===== General Instructions for Use ===== ===== General Instructions for Use =====
  • tools/milling_machine.txt
  • Last modified: 2022/08/03 13:19
  • by ben