Perth Artifactory

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tools:lasercutters:start [2020/06/10 11:45]
fletcher Proposed purge
tools:lasercutters:start [2020/07/28 16:34] (current)
fletcher :(
Line 182: Line 182:
 Operators are users that have completed a number of laser cutter projects and has shown sufficient proficiency to be allowed to work the laser cutter unattended provided they stick to approved materials. Operators can access the laser cutter keys. Operators are initially approved for the small laser cutter only and must still be supervised for the large laser. After an unspecified time they will be approved for both. Operators are users that have completed a number of laser cutter projects and has shown sufficient proficiency to be allowed to work the laser cutter unattended provided they stick to approved materials. Operators can access the laser cutter keys. Operators are initially approved for the small laser cutter only and must still be supervised for the large laser. After an unspecified time they will be approved for both.
 ===Trainers=== ===Trainers===
-These are experienced and super experienced laser cutter users, able to clean, calibrate and extinguish the laser cutters. Trainers are the ones that the new users must approach before they are allowed to <del>hump</del> use the lasers. Trainers must trial and approve cutting of new materials.+These are experienced and super experienced laser cutter users, able to clean, calibrate and extinguish the laser cutters. Trainers are the ones that the new users must approach before they are allowed to use the lasers. Trainers must trial and approve cutting of new materials.
 ===== Specifications ===== ===== Specifications =====
 |< 100% 10% 10% 50% 30% >| |< 100% 10% 10% 50% 30% >|