This tool is approved for use by any member that has completed the workshop safety induction, if you have not used a band saw before, ask another member for basic training.
For cutting thin wood and acrylic ONLY.
Has a table guide for making straight passes.
Use a slow feed rate - there shouldbe negligible cutting sound and no binding.
Use attached vacuum for dust extraction and open machine and clean out inside after extended cutting.
|Input||240 V~50 Hz|
|No load speed||1400 rpm|
|Dust port||Ø44.5 mm|
|Max saw blade width / length||10 mm X 1510 mm|
|Max saw blade thickness||0.35 mm|
|Max height of cut||80 mm|
|Saw table size||290 mm x 290 mm|
1511 x 6.35 mm Blade (metric) 59 1/2“ x 1/4” (imperial)