subcommittee:laser-minutes-20210619

Laser Subcommittee Meeting 2021-06-19

  • Attendees: BlakeS, NickB, JC, BenC, MichaelO'C, BruceC, FletcherB
    • Next meeting(s): Four weeks: regular third Saturday 14:00 ? OK
    • Promoted, extra attendees!
  • LG500 “Little Red”
    • cutting 3mm MDF in centre and corners of the bed at 40mm/s
  • KH7050 “Kellogg/Middle”: operational, was out-of-order
    • cutting 3mm MDF in centre and corners of the bed at 20mm/s
    • X end-stop sensor failed 2021-05-22
    • Levelled, shim placed under honeycomb: thanks Fletcher+Blake
    • Clean lens
    • Mirror clean, mirror 2 adjustment, beam was hitting head too high
  • LC1290 “Big Red”
    • cutting 3mm MDF in centre and corners of the bed at 50mm/s
    • Levelled 2021-06-18, thanks GlennM
    • Clean lens
    • Vacuum Constanza-bed!
    • Empty compressor tanks, water trap
    • Hour meter
      • The hour meter started from 1.6 hours, at 20171210 , 400-512 beam-active cutting hours per annum
DateHour count
201712101.6
2017121711.5
20181217488.9 100W installed 20181222
201912161026.3
202012191441.1
202103201515.6 SPT-TR130W tube installed
202105151554.1
202106191581.1
  • subcommittee/laser-minutes-20210619.txt
  • Last modified: 2021/06/19 16:53
  • by nick