User Tools

Site Tools


subcommittee:laser-minutes-20181217

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
subcommittee:laser-minutes-20181217 [20181218-0513]
nick goggles
subcommittee:laser-minutes-20181217 [20190311-1903] (current)
nick 130W Reci W6 #3 install date
Line 43: Line 43:
   * LC1290/Big Red fault finding   * LC1290/Big Red fault finding
     * Laser is cutting very poorly, but displayed current is still OK     * Laser is cutting very poorly, but displayed current is still OK
-      * If the tube is failing; it's our third (second arrived broken) Reci W6, installed 2016-12so it has had about 1000 hours burn time?+      * If the tube is failing; it's our third (second arrived broken) Reci W6, installed 2016-12-28: so it has had about 1000 hours burn time?
       * If the HV PSU is failing; it's our second MYJG-150 (150W), USD$410+shipping,​ installed 2015-01? A suitable spare will probably be cheaper and we're inclined to get one regardless.       * If the HV PSU is failing; it's our second MYJG-150 (150W), USD$410+shipping,​ installed 2015-01? A suitable spare will probably be cheaper and we're inclined to get one regardless.
     * Blake: Diagnostics yesterday 2018-12-16     * Blake: Diagnostics yesterday 2018-12-16
/var/www/wiki.artifactory.org.au/htdocs/data/pages/subcommittee/laser-minutes-20181217.txt · Last modified: 20190311-1903 by nick