User Tools

Site Tools


subcommittee:laser-minutes-20170503

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
subcommittee:laser-minutes-20170503 [20170529-1921]
hypnorm
subcommittee:laser-minutes-20170503 [20170529-2323] (current)
nick Listify, remove previous month
Line 1: Line 1:
-== Laser subcommittee 2017-05-39 == 
- 
-Next Meeting 26th June 
- 
-Ordered silicon Tubing - not arrived yet.  
- 
-Glenn to look at sourcing some keys 
-Nick has found some cheap lenses - will order 2 of each focal length. 
- 
- 
-It has been mentioned that an email regarding lasercutter safety - namely there are issues impacting on safety. 
-Mitch has documented a list of issues and proposed fixes. Sub-committee will take this to main committee for further guidance and clarification. ​ 
- 
-We would like clarification specifically on legislation and documentation. Will report back after main committee meeting next week. 
- 
-Nick will pick up some HV silicon tubing - red. 
- 
-There may have been an issue with the Stop button on big red - Jim will investigate. 
- 
 == Laser subcommittee meeting 2017-05-03 == == Laser subcommittee meeting 2017-05-03 ==
  
-SUB-COMMITTEE BUSINESS +  * SUB-COMMITTEE BUSINESS 
- +    ​* ​Nick is stepping down as Secretary of the laser sub-committee – thanks for all your great work!! 
-Nick is stepping down as Secretary of the laser sub-committee – thanks for all your great work!! +    ​* ​Jim is now secretary ​effective immediately 
-Jim is now secretary ​– effective immediately +    ​* ​Next meeting 29th May at 6:30 
-Next meeting 29th May at 6:30 +  ​* ​SPARES 
- +    ​* ​Spare lenses Nick will order the following lenses 50.3mm x 1 63mm x 2  
-SPARES +    ​* ​Mirrors ​Have enough at present 
- +    * Silicone ​tubing ​Jim has ordered 10m (ID – 7mm x OD – 10mm) 
-Spare lenses Nick will order the following lenses 50.3mm x 1 63mm x 2  +    ​* ​Door Keys Jim will arrange for spare keys to be cut 
-Mirrors ​– Have enough at present +    ​* ​Beam combiner ​Nick to source laser beam combiner 
-Silicon ​tubing ​– Jim has ordered 10m (ID – 7mm x OD – 10mm) +  ​* ​MEMBERSHIP LIST 
-Door Keys – Jim will arrange for spare keys to be cut +    ​* ​Jim will work on bringing the list of trainers up to date  
-Beam combiner ​– Nick to source laser beam combiner +  ​* ​LASERBOT ​- RFID logging/​logons 
- +    ​* ​Jim to investigate access what is required for automated control mechanism
-MEMBERSHIP LIST +
- +
-Jim will work on bringing the list of trainers up to date  +
- +
-LASERBOT +
- +
-Jim to investigate access what is required for automated control mechanism +
- +
- +
-=== Previous minutes 2017-03-22 follow === +
-== Laser subcommittee meeting 2017-03-22 == +
- +
-  * Jim, Nick, Glenn Martin +
- +
-  * artifactory-laser list: Currently viewable by public, members are the subcommittee +
- +
-  * New Y-axis driver has arrived +
-    * Install into LG500! +
- +
-  * New 1 GaAs lens (thanks Steve!) - no need to install right now, assuming it's a 2" focus +
-    * Install into LC1290, should be better on 6mm and up +
- +
-  * Maintenance:​ schedule +
-    * Bed level, height adjustment +
-    * Mirror alignment&​clean +
-    * Lens clean +
- +
-  * Review member training list on wiki +
-    * Train up trainers on maintenance +
- +
-  * Next subcommittee meeting: Wednesday 20170419-1830  +
- +
-  * Carried forward: +
-    * Can we find/​replace the missing access keys? Only 2 of 6? remain +
-    * Monitor/​backup PC config +
-    * 1 fresh spare lens: want 2 * 50.8mm + 2 * 63.5mm +
-      * Regarded as a consumable +
-      * Want list of spares on the wiki +
-      * Resolved: buy some!+
  
/var/www/wiki.artifactory.org.au/htdocs/data/pages/subcommittee/laser-minutes-20170503.txt · Last modified: 20170529-2323 by nick