User Tools

Site Tools


subcommittee:it_infrastructure:setup_standards:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

subcommittee:it_infrastructure:setup_standards:start [20190421-1602] (current)
scott created
Line 1: Line 1:
 +Hardware and Software Setup Standards
 +
 +[[subcommittee:​it_infrastructure:​setup_standards:​cameras|Security Cameras]]
 +
 +Access is based on a hierarchical system. If a tier has access to a server it is assumed that tiers above that also have access unless otherwise stated.
 +
 +Order:
 +  - Members
 +  - IT Subcommittee
 +  - Specific Officeholders
 +  - IT Officer
 +
 +====== Servers ======
 +
 +Unless otherwise noted auth is controlled by Userify.
 +
 +===== Core =====
 +
 +^ Use | Used for general Unix access to the space. Can also be used for tunneling if desired. |
 +^ SSH | Members+ |
 +^ Root | IT Subcommittee+ |
 +^ OS | Ubuntu 18.04 |
 +^ Hostname | newcore |
 +
 +Notes:
 +  * Port forwarded to XXX
 +
 +===== Filer =====
 +
 +^ Use | Runs the SMB share available in the space |
 +^ SSH | IT Subcommittee+ |
 +^ Root | IT Subcommittee+ |
 +^ OS | Ubuntu 18.04 |
 +^ Hostname | filer |
 +
 +Notes:
 +  * 32G sda (OS), 750G sdb (files, /​mnt/​shared)
 +  * Running SMB
 +
 +===== NVR =====
 +
 +^ Use | Records footage from the security cameras |
 +^ SSH | Specific Officeholders |
 +^ Root | Specific Officeholders |
 +^ OS | Ubuntu 14.04 |
 +^ Hostname | nvr |
 +
 +Notes:
 +  * 32G sda (OS), 750G sdb (footage, /​mnt/​footage)
 +  * Running UniFi Video 1.3.5 as unifi-video
 +
 +====== Misc ======
 +
 +===== UniFi Video =====
 +
 +The UniFi Video installation hostname is **NVR** and is listening via https on 7443
 +User accounts are created individually,​ contact the IT officer if you believe you should have access.
 +
 +===== Security Cameras =====
 +
 +//This process applies to Ubiquiti cameras that connect to our NVR//
 +
 +Set the camera to DHCP and configure details via {pfsense} to
 +  * name: cam-$location
 +  * IP: IP LIST
 +
 +Set the camera credentials to the ones found in the IT KeePass database under Security.
 +
 +Use the NVR to adopt the camera
 +
 +Camera setup:
 +  * Record mode: motion
 +  * Quality: High
 +  * Seconds before/​after:​ 10
  
/var/www/wiki.artifactory.org.au/htdocs/data/pages/subcommittee/it_infrastructure/setup_standards/start.txt · Last modified: 20190421-1602 by scott