This process applies to Ubiquiti cameras that connect to our NVR

Set the camera to DHCP and configure static map via {pfsense} to

  • name: cam-$location
  • IP: Select next in range using

Set the camera credentials to the ones found in the password database under Security.

Use the NVR to adopt the camera

Camera setup:

  • Record mode: motion
  • Quality: High
  • Seconds before/after: 10
  • subcommittee/it_infrastructure/security_cameras.txt
  • Last modified: 2020/03/12 12:49
  • (external edit)