User Tools

Site Tools


projects:newnetworkednumberdisplay

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
projects:newnetworkednumberdisplay [20131219-1641]
cheshire created
projects:newnetworkednumberdisplay [20140312-0311] (current)
Line 7: Line 7:
   - 3 layer design. Upper layer is black painted MDF "​Mask"​ and White Perspex "​Segments"​. Middle layer is white painted MDF "​airgap"​ with marginally smaller versions of the segments. This makes assembly easier and gives us some more dispersal on the LED light. Bottom layer is white painted mdf. It's got holes cut to hold the LEDs nicely in place to make construction easier.   - 3 layer design. Upper layer is black painted MDF "​Mask"​ and White Perspex "​Segments"​. Middle layer is white painted MDF "​airgap"​ with marginally smaller versions of the segments. This makes assembly easier and gives us some more dispersal on the LED light. Bottom layer is white painted mdf. It's got holes cut to hold the LEDs nicely in place to make construction easier.
   - There'​ll be a wooden frame to hold this all together at the end. I envision 4 pieces of pine with 45º cuts in the corners with a routed channel to hold the layers nicely together. (Insert illustration here)   - There'​ll be a wooden frame to hold this all together at the end. I envision 4 pieces of pine with 45º cuts in the corners with a routed channel to hold the layers nicely together. (Insert illustration here)
 +Here is the 3 layers, ready to be cut with the big laser 
 +{{:​projects:​counter1.dxf.zip|}}\\ ​  
 +Here are the segments ready to be cut with the small laser 
 +{{:​projects:​counter1segments.dxf.zip|}}
/var/www/wiki.artifactory.org.au/htdocs/data/pages/projects/newnetworkednumberdisplay.txt · Last modified: 20140312-0311 (external edit)